This product is a lightweight modified accessory.Be sure to follow this manual when using it,otherwise it may be damaged

Product Name:Carbonparts Carbon Fiber Computer Mount

See the outer packaging for suitable models. This manual is intended to illustrate product installation considerations. Different models / batches may vary.

⚠ This manual is for professional bicycle technicians only. If you are not trained in this area,it is recommended that you visit your local professional bicycle shop for installation. Improper installation may cause product damage and serious injury to persons.

• If you have questions about the contents of this manual, stop the installation immediately and contact the purchase channel for help from a salesperson.
• If you find any security hazards in the product during use or installation, such as the following: Screw teeth are slippery; Screw lattice; It cannot be locked down to a specified torque; There was a noise during the disassembly process; Physically visible fractures / twists / deformities, etc. Please stop using it immediately and contact customer service for processing.
• When riding or transporting, a watch rack may crack or deformation due to a fall or squeeze. Check with a professional car shop; If the abnormal accessories are not discovered in time, it may cause serious consequences such as breaking the watch rack during cycling.

Installation Instructions:
1. The use of sinking screws is prohibited(except for Bigrock Il), it is recommended to use titanium alloy screws attached to the stopwatch rack. If you need to upgrade the screw yourself, choose an umbrellahead screw with a flat surface as a priority.

2. Maximum tightness of the screw:2N.m.It is prohibited to use any grease, interface grease, titanium alloy anti-fusion agent, or other products on the screws position.Recommend the use of Lettie 222 low-strength rebar.

3. Maximum carrying weight of the watch rack:500g

The way to install the lower hang is as shown in the following diagram:

The center of gravity of the hanging article should be directly below the hanging point, and the distance from the bottom of the hanging article to the hanging point should be less than 80mm.
The suspension of drones, 360 panoramic cameras, extenders, selfie sticks and other products with longer arms is prohibited.

4. Some models are equipped with 3D printing gasket,if equipped, please refer to the following picture for installation:

① Cervelo S5 Drop - down pad

②  Angle fine - tuning shim

③ Tavelo/Vision 5D evo spacer

Quality assurance policy:

Carbonparts guarantees that its products are free of defects in material and workmanship for 1 (one) year after initial purchase.

If the product during this warranty period is damaged,we will provide you with a free replacement service.

The warranty policy is limited to the first-time buyer,and the warranty automatically expires after a transferor second-hand transaction

Restrictions on warranty:

* This warranty does not apply to products that are not properly installed, used, adjusted or maintained in accordance with the appropriate Carbonparts manual.

* This warranty does not apply: including, but not limited to, damage caused by collision, shock, external forces within unconventional usage range, forces that subject the product to more than its design value, non-compliance with usage specifications

* This warranty does not apply to damage caused byself-working, alteration of the product, self-matching of third party accessories and screws, or unusual use of wear and tear.

Carbonparts Care Program:

If the product is damaged by non-quality factors such as a crash, collision or faulty installation, Carbonparts provides you with "Half price for a new one" Support,designed to help you get back on the field as soon aspossible.

To enable this service, please contact customer service from the original purchase channel and return the damaged part.